Guide
Stuck uPVC Window Handle? Why a Window Won't Lock, and the Fixes
A uPVC window handle that sticks, or a window that will not lock, usually has one of four faults: the sash has dropped so the locking cams miss their keeps, the espagnolette mechanism has failed, the handle has broken inside, or the handle is locked with its key. Check those first. A locksmith's labour is £65 to £85 an hour plus parts.
How does a uPVC window lock?
Turning the handle turns a square spindle. The spindle drives a long metal strip hidden in the edge of the opening sash, called an espagnolette or espag. As the strip slides, it moves locking cams, often mushroom-shaped, into keeps fixed to the frame. The keeps pull the sash tight against its seals and hold it shut.
So a window that will not lock has a fault in one of four places: the handle, the espag, the cams and keeps lining up, or the hinges that hold the sash in position. Many handles also have a small key lock or push button that stops the handle turning at all.
Why won't my uPVC window handle turn?
Check the simple things before blaming the mechanism:
- Is the handle locked? A handle with a key lock or a push button will not turn until it is released. A lost key is a common cause of a 'stuck' handle.
- Is it caught on a keep? If the sash has dropped, a cam can jam against the edge of its keep. Pushing the sash firmly shut while turning often frees it.
- Has the handle broken inside? If it feels loose and turns without moving anything, or is stiff and then suddenly free, the handle's own mechanism has failed.
- Has the espag seized or snapped? A handle that moves part of the way and then stops, with no keep in the way, points to the strip itself.
Do not force a handle that is stuck in the locked position. You can twist the spindle or crack the casting, and a window stuck shut is easier to fix than one stuck half-locked.
Why won't the window close tight or lock?
If the handle turns but the window does not pull in tight, open the sash and watch the cams while you turn the handle:
- The cams do not move: the espag or the handle has failed.
- The cams move but miss the keeps: the sash has dropped or shifted, usually because the friction hinges at the top and bottom have worn.
- The cams meet the keeps but the window still rattles: the keeps may be set too loose, or the seals have flattened.
Scrape marks on a keep, or on the frame beside it, show where a cam has been hitting. Worn friction hinges are a frequent cause on windows that have been opened wide for years; once they sag, the cams cannot reach their keeps.
What can you safely try yourself?
Some faults need no parts:
- Clean and lubricate the cams, keeps and the visible parts of the espag with a light PTFE or silicone spray. Grease that collects grit makes things worse.
- Tighten the handle. Swivel the cover plate at the base of the handle to reach the two fixing screws.
- Adjust the keeps. Many keeps have an adjustable cam or can be moved slightly to meet a sash that has shifted.
- Support a sagging sash by lifting it slightly as you turn the handle. If that lets it lock, the hinges are worn.
If the window is stuck open, close it as far as it will go and keep the room shut until it is fixed. A window that cannot be secured is the job to get done first.
What does a repair involve, and what does it cost?
Most repairs are a part and some labour:
| Fault | Usual fix | How the part is matched |
|---|---|---|
| Handle broken or locked with a lost key | New locking handle | Spindle length and screw centres |
| Espag failed | New espagnolette strip | Backset and length |
| Sash dropped | New friction hinges | Hinge length and type |
| Keep worn or loose | New or re-set keep | Keep pattern |
Window lock repairs are usually charged as labour: £65 to £85 an hour in daytime (Checkatrade about £65, Bark's average £80; the MLA's 2026 list from £85), plus parts. None of the price guides we use publishes a fitted price for window locks.
When you ask for a quote, give the window type, how old it is, what the handle does, and a photo of the edge of the sash with the maker's name if one is stamped on it. That lets the locksmith bring the right espag or hinges on the first visit.
Common questions
Can I replace a uPVC window handle myself?
Usually, yes. Open the window, swivel the cover plate, undo the two screws and pull the handle off. Buy a new one with the same spindle length and screw centres.
Why is my uPVC window handle loose?
Often the two fixing screws under the cover plate have worked loose. If tightening them does not help, the handle's internal mechanism has worn and the handle needs replacing.
I have lost my window key. Do I need new handles?
Not always. A locksmith can often supply a key to match. If not, the locking handle is replaced, which is a simple job on most uPVC windows.
Is it better to repair or replace a uPVC window?
Repair, if the frame is sound and the glass is clear. Handles, espags and hinges are all replaceable. A misted sealed unit is a separate glazing job.