Guide
How to Adjust a uPVC Door That Has Dropped or Sags
A uPVC door that catches on the frame or needs a hard lift to lock has usually dropped on its hinges. Most uPVC doors have hinges with three settings, height, side to side and compression, turned with an Allen key. If adjustment does not cure it, a gearbox repair starts at £85 (MLA) and a new multipoint mechanism is about £175 fitted (MyJobQuote).
How do you know a uPVC door has dropped?
A dropped door sits lower on the lock side than it should, so the hooks and rollers on its edge no longer meet their keeps on the frame. The signs come on slowly:
- You have to lift the handle harder than you used to, or push the door shut, before it will lock.
- The key turns stiffly, or only when you lean on the door.
- The bottom corner on the lock side rubs the frame or the threshold.
- Daylight or a draught appears at the top corner on the lock side.
- The gap between the door and the frame is wider at the top than at the bottom.
The Master Locksmiths Association also points to the weather: uPVC expands in warm spells and contracts in cold ones, so a door that is only just in line may lock easily in winter and stick in summer.
Why do uPVC doors drop?
A uPVC door is heavy for its hinges. Most of the weight is the double-glazed unit, and over the years it pulls the door down on the side away from the hinges. Hinge screws loosen, hinge parts wear, and a door that is often slammed or leant on drops sooner.
There is a second cause that hinges cannot fix. Inside the frame, small plastic packers hold the glass unit square. If they slip, the door sags within its own frame. That is a glazier's job: the glazing beads come off and the unit is re-packed. If hinge adjustment helps for a few weeks and then the drop returns, ask about the packers.
Which hinges does your door have?
Open the door and look at the hinges from the inside:
- Flag hinges have two leaves that look like small flags, one on the door and one on the frame. A cap usually clips over the adjusting screws. They are the most common type on uPVC and composite doors.
- Adjustable butt hinges look like ordinary hinges with screw heads in or beside the knuckle.
- Concealed hinges sit hidden in the edge of the door and frame, and adjust from inside the hinge once the door is open.
Some older hinges do not adjust at all. If you cannot find any adjusting screws, the hinge may need replacing rather than setting.
How do you adjust uPVC door hinges?
Work slowly, one hinge and a small turn at a time, testing after each change. With the door open and supported:
- Take off the cover caps so you can see the adjusting screws, usually for an Allen key.
- Height. One screw raises or lowers the whole door. Raising it by a small amount often lets the hooks meet the keeps again.
- Side to side. Another screw moves the door towards or away from the hinge side. Pulling the top of the door towards the hinges lifts the lock side, which is the usual fix for a sag.
- Compression. This sets how hard the door presses against its seals. Too tight makes the door hard to lock; too loose lets in draughts.
- Test after every change: close the door gently, lift the handle and turn the key without leaning on anything.
Make the same adjustment on each hinge where the instructions say to, so the door is not twisted. If a screw will not turn or a cap breaks, stop there.
When is the problem not the hinges?
Hinge adjustment fixes alignment, not broken parts. Look elsewhere if:
- The keeps have moved. Many keeps on the frame can be adjusted or packed out. Marks on a keep show where the hook is hitting.
- The gearbox is worn. The handle feels loose, does not spring back level, or lifts without throwing the hooks. The multipoint lock guide explains the parts.
- The cylinder is failing. The key catches whether the door is open or shut.
- The frame itself is out of square, which needs a window and door fitter.
If the door is new enough to be under the installer's guarantee, call the installer before adjusting anything.
What does fixing a dropped door cost?
Adjusting hinges and keeps is usually charged as labour. The price climbs when parts have already failed from months of forcing the handle:
| Work | Typical price | Source |
|---|---|---|
| Locksmith's daytime labour | £65 to £85 an hour | Checkatrade, Bark, MLA |
| Gearbox repair | from £85 | MLA, 2026 |
| New multipoint mechanism, fitted | about £175 | MyJobQuote |
| uPVC lock repair, general | £150 to £300 or more | MyJobQuote |
Ask the locksmith to adjust the door before replacing anything, and to tell you which part has failed if a part is needed. A door that is set right and then lubricated with a PTFE spray, which the MLA prefers to ordinary WD-40 for these mechanisms, should lock with a light lift.
Common questions
Can I adjust a uPVC door myself?
Often, yes, with an Allen key and patience. Small turns, one hinge at a time, testing each change. Stop if a screw will not move, a hinge is cracked or the door is under an installer's guarantee.
Why is my uPVC door hard to lock in summer?
uPVC expands in warm weather, so a door that is slightly out of line binds more. Adjusting the hinges or keeps a little usually lets it lock in every season.
How often should a uPVC door mechanism be lubricated?
The MLA suggests every three months, using a PTFE lubricant on the hooks, rollers and keeps rather than ordinary WD-40, which can attract dirt.
Will adjusting the hinges stop the draught?
Often. The compression setting presses the door against its seals. If the seals themselves are flattened or torn, they need replacing as well.