Guide
Can Any Key Be Copied? How Long Key Cutting Takes
A standard Yale-type key takes under a minute to cut and a mortice key up to five minutes, according to the MLA; a safe key can take 20 to 25 minutes. Patented and restricted keys are the exception: only an authorised supplier can cut them, against the security card or the owner's written authority.
How long does key cutting take?
For an everyday key, a few minutes at most. The Master Locksmiths Association's key cutting guide gives these times, and the prices are the ranges this site uses:
| Key | Time to cut (MLA) | Typical price |
|---|---|---|
| Cylinder or Yale-type key | under a minute | £4 to £7 (Home Secure Shop); MLA from £5.55 |
| Mortice key | up to 5 minutes | MLA from £7.40 |
| Safe key | 20 to 25 minutes, often finished by hand | MLA from £23.25 |
| Security or restricted key | ordered through the system's supplier | MLA from £21.15 |
Most of the time on a simple key is finding the right blank. A restricted key is not cut over the counter at all, so expect to order it and collect it later. Car keys are a separate job, because a modern key has a chip that has to be programmed to the car.
Can any key be copied?
In principle, yes. The MLA's own view is that no key in the world is impossible to copy, but patented and security keys are much harder to copy than ordinary ones. The protection is less about the metal and more about control:
- the blanks are not sold to every key cutter;
- the key profile is protected, so others may not make it;
- each new key is cut only against proof that the person asking is entitled to it.
Several doors on one site can share a restricted profile, and a business keeps the card for it locked away. A standard key from a hardware shop has none of those controls. Anyone holding it for a few minutes can have it copied, which is why a key that has been out of your hands, after a tenancy or a lost bag, is a reason to think about changing the cylinder.
What about keys stamped 'do not copy'?
The MLA says a 'do not copy' stamp shows the key is restricted, fitted by a landlord or the owner of the property. Many key cutters will decline to copy one without permission, but a stamp on its own is a request rather than a barrier: a plain blank with words on it can still be cut by a machine.
If you need a spare of a stamped key for a rented home or a workplace, ask whoever issued it. They may hold a card or an account with the supplier and can order one properly. A spare cut without permission can breach a tenancy agreement or a workplace policy, and it will not work if the lock is later changed for that reason.
How do restricted and patented key systems work?
A restricted system is a lock and key range sold only through authorised locksmiths. The MLA explains that patented keys have to be supplied by the originating centre, which holds a licence agreement with the manufacturer. To get another key you usually show:
- the security or registration card that came with the locks, or
- a letter of authorisation from the system's owner, such as a landlord or business, often on headed paper.
Some keys carry an MLA code. The MLA says that means a particular locksmith holds the licence for that key and is the only one who can replace it. Businesses use the same idea in master key systems, where a single key opens several doors and every copy is accounted for.
Can a key be cut without the original?
Often, yes. A locksmith can do it in a few ways:
- From a code. Some keys and locks carry a code that lets a locksmith cut a key from records. Keep the code private.
- From the lock. A locksmith can make a key to fit an existing lock, which is what happens after a key is lost or snaps beyond copying.
- From a photograph. The MLA says this is possible, but only for certain types of key. It is a good reason not to post pictures of your keys online.
One more caution: avoid having keys cut from a copy of a copy. Each generation loses a little accuracy, and an inaccurate copy is a common reason for keys sticking or snapping. Cut new keys from the original or from the code.
Common questions
Can a key cutter refuse to copy a key?
Yes. A key cutter can decline any job, and many will refuse a key marked 'do not copy' or a restricted key without the card or the owner's authority.
Can I get a spare key cut for my rented flat?
Check your tenancy first, and ask the landlord if the key is stamped or restricted. A landlord can usually order an extra key properly against the system's card.
Why does my newly cut key not work?
Usually a small cutting error, or the copy was taken from a worn key. Take it back with the original; most key cutters will recut it.
Can any key cutter copy a car key?
The blade, sometimes. A modern car key also has a chip that must be programmed to the car, which needs an auto locksmith or a dealer.